User Config Menu - Sony PVM-X300 Operating Instructions Manual

USER CONFIG menu

The USER CONFIG menu consists of the following
setting menus: input setting, function button setting,
marker setting, focus assist setting, time code setting,
audio level meter setting, audio setting and system
setting.
There are two input settings:
• 4K/QFHD INPUT SETTING: to display 4K or QFHD
images
• 2K/HD INPUT SETTING: to display 2K or HD
images
Note
The 4K/QFHD INPUT SETTING and 2K/HD INPUT
SETTING menus cannot be accessed when OPTION is
selected.
USER CONFIG
4K/QFHD INPUT SETTING:
2K/HD INPUT SETTING:
FUNCTION BUTTON SETTING:
MARKER SETTING:
FOCUS ASSIST SETTING:
TIME CODE SETTING:
AUDIO LEVEL METER SETTING:
AUDIO SETTING:
SYSTEM SETTING:
4K/QFHD INPUT SETTING
This is the input setting for 4096 × 2160 and 3840 ×
2160 signals. The setting items differ depending on the
selection made with the input select button (SDI or
HDMI) on the front panel.
When SDI input is selected
USER CONFIG-4K/QFHD INPUT SETTING
INTERFACE FORMAT:
IMAGE DIVISION:
SIGNAL FORMAT:
INPUT:
RGB RANGE:
When HDMI input is selected
USER CONFIG-4K/QFHD INPUT SETTING
INTERFACE FORMAT:
SIGNAL FORMAT:
INPUT:
RGB RANGE:
HDMI AUTO:
16
Adjustment Using the Menus
xxxxxxxxx
xxxxxx
xxxxxxxx
xxxx
xxxx
xxxxxxxxx
x
xxxx
xxxx
xxxx
Submenu Setting
INTERFACE FORMAT Selects the interface format.
For SDI input
Select one of the following four
interface formats. The IMAGE
DIVISION and SIGNAL
FORMAT items may appear
depending on the selection.
• QUAD-LINK 3G/HD-SDI: The
• QUAD-LINK 3G-SDI: Select
• QUAD-LINK HD-SDI: The
• DUAL-LINK 3G-SDI: Select
For HDMI input
The INTERFACE FORMAT is
fixed to SINGLE-LINK HDMI.
Select the INPUT.
IMAGE DIVISION Selects the image division when
QUAD-LINK 3G-SDI or DUAL-
LINK 3G-SDI is selected for the
INTERFACE FORMAT.
• AUTO: to set the image division
• SQUARE: to input the Square
• 2-SAMPLE INTERLEAVE: to
SIGNAL FORMAT For SDI input
Selects the format of the SDI input
signal when QUAD-LINK 3G-SDI
is selected for the INTERFACE
FORMAT.
You can select from among AUTO,
422 YCBCR 10BIT, 444 RGB
10BIT, 444 YCBCR 10BIT,
444 RGB 12BIT, or 444 YCBCR
12BIT.
For HDMI input
This item cannot be accessed.
IMAGE DIVISION and
SIGNAL FORMAT are set
automatically according to
the input signal (AUTO).
The INPUT is fixed to
INPUT 1&2&3&4.
the IMAGE DIVISION and
SIGNAL FORMAT. The
INPUT is fixed to INPUT
1&2&3&4.
IMAGE DIVISION is fixed
to SQUARE, the SIGNAL
FORMAT to 422 YCBCR
10BIT, and the INPUT to
INPUT 1&2&3&4.
the IMAGE DIVISION and
INPUT. The SIGNAL
FORMAT is fixed to 422
YCBCR 10BIT.
by detecting the input signal
automatically
division signal
input the 2-sample
interleave division signal