Connecting The Sdi Signals - Sony PVM-X300 Operating Instructions Manual

2K/HD mode
22

Connecting the SDI Signals

1920 × 1080
1280 × 720
2048 × 1080
1024 × 768
800 × 600
726 × 576
720 × 480
640 × 480
Connecting the SDI
Signals
Single Link 3G/HD-SDI, Dual Link 3G-SDI, and Quad
Link 3G-SDI signals can be input to the SDI IN
connectors of this unit.
Up to 4-channel Single Link 3G/HD-SDI signals, up to
2-channel Dual Link 3G-SDI signals, or 1-channel Quad
Link 3G-SDI signals can be input. Use the appropriate
input connectors depending on the input signal,
referring to the tables below.
Connecting the Dual Link 3G-SDI* signal
To input 2-sample interleave division signals
Connector Input signal
SDI IN 1
3G-SDI Link 1
SDI IN 2 3G-SDI Link 2
or
Connector Input signal
SDI IN 3
3G-SDI Link 1
SDI IN 4
3G-SDI Link 2
To input Square division signals
Connector Input signal
SDI IN 1 Mapping signal of Sub image 1 (upper-
left screen) and Sub image 2 (upper-right
screen)
SDI IN 2 Mapping signal of Sub image 3 (lower-
left screen) and Sub image 4 (lower-right
screen)
or
Connector Input signal
SDI IN 3
Mapping signal of Sub image 1 (upper-
left screen) and Sub image 2 (upper-right
screen)
SDI IN 4
Mapping signal of Sub image 3 (lower-
left screen) and Sub image 4 (lower-right
screen)
When only 1-channel Dual Link 3G-SDI signal is input,
the Single Link 3G/HD-SDI signals of up to 2 channels
can be input via the SDI IN connectors that are not used
for the Dual Link 3G-SDI signal.