Scan Mode Image - Sony PVM-X300 Operating Instructions Manual

CONTRAST
Press the button to display the adjustment screen and
adjust the picture contrast. Press again to hide the
adjustment screen. However, the picture contrast
remains adjustable. Turn the menu selection control
right to increase the contrast and turn left to decrease it.
CHROMA
Press the button to display the adjustment screen and
adjust the color intensity. Press again to hide the
adjustment screen. However, the color intensity remains
adjustable. Turn the menu selection control right to
increase the intensity and turn left to decrease it.
BACKLIGHT
Press the button to display the adjustment screen and
adjust the backlight brightness. Press again to hide the
adjustment screen. However, the backlight brightness
remains adjustable. Turn the menu selection control
right to increase the brightness and turn left to decrease
it.
NATIVE SCAN
You can set whether the pixel interpolation is to be
applied or not when displaying 2K or HD signals to
expand to full screen. Normally the pixel interpolation is
applied when expanding the image (NORMAL SCAN).
Press the button to expand the image without
interpolation (NATIVE SCAN). Press the button again
to resume interpolation.
VOLUME
Press the button to display the adjustment screen and
adjust the volume. Press again to hide the adjustment
screen. However, the volume remains adjustable. Turn
the menu selection control right to increase the volume
and turn left to decrease it.
VIEW MODE
Press the button to select the view mode. Each time the
button is pressed, 4K/QFHD mode or 2K/HD mode is
set alternately.
APERTURE
Press the button to display the adjustment screen and
adjust picture sharpness. Press again to hide the
adjustment screen. However, picture sharpness remains
adjustable. Turn the menu selection control right to
make the picture sharper and turn it left to make the
picture softer.
MARKER
Press the button to display the marker. Set the marker in
the MARKER SETTING menu (page 19).
TIME CODE
You can display the time code when SDI signal input is
selected.
Press the button to display the time code. Adjust the
settings for the time code display in the TIME CODE
SETTING menu (page 19).
AUDIO LEVEL M.
You can display the audio level meter when SDI signal
input is selected. The audio level meter shows the CH1
to CH8 or CH9 to CH16 channels that were selected in
the AUDIO SETTING menu.
Press the button to display the audio level meter. Adjust
the settings for the audio level meter display in AUDIO
LEVEL METER SETTING menu (page 20).
FOCUS ASSIST
Press the button to confirm the camera focus.
An image with sharpened edges is displayed.
CHROMA UP
Press the button to maximize the color intensity (about
twice). Press the button again to resume normal color
intensity.

Scan mode image

4K/QFHD
mode
4096 × 2160
3840 × 2160
Adjustment Using the Menus
21