Sony PVM-X300 Operating Instructions Manual page 17

Submenu Setting
INPUT Selects the input connector to be
used.
For SDI input
Select the input connector when
DUAL-LINK 3G-SDI is selected
for the INTERFACE FORMAT.
• INPUT 1&2: to use SDI IN
• INPUT 3&4
This item is fixed to INPUT
1&2&3&4 when the INTERFACE
FORMAT is set to any other option
than DUAL-LINK 3G-SDI.
For HDMI input
• INPUT 1: to use HDMI input
• INPUT 2: to use HDMI input
• INPUT 3: to use HDMI input
• INPUT 4: to use HDMI input
RGB RANGE Sets the black level and white level
(quantization range) for the RGB
format.
For SDI input
• FULL: 0 (black level) to 1023
• LIMITED: 64 (10bit)/256
For HDMI input
• FULL: 0 (black) to 255 (8bit)/
• LIMITED: 16 (8bit)/64 (10bit)/
HDMI AUTO Sets the manual or automatic
setting for the quantization range of
the HDMI signal.
• OFF: to set the quantization
• ON: to set the quantization range
2K/HD INPUT SETTING
This is the input setting for signals below 2048 × 1080.
The setting items differ depending on the selection made
with the input select button (SDI or HDMI) on the front
panel.
connectors 1 and 2
to use SDI IN
:
connectors 3 and 4
connector 1
connector 2
connector 3
connector 4
(10bit)/4095 (12bit) (white
level)
(12bit) (black level) to 940
(10bit)/3760 (12bit) (white
level)
1023 (10bit)/4095 (12bit)
(white level)
256 (12bit) (black level) to
235 (8bit)/940 (10bit)/3760
(12bit) (white level)
range manually using RGB
RANGE of the menu
automatically according to
the input signal
When SDI input is selected
USER CONFIG-2K/HD INPUT SETTING
xxxxxxxxx
INTERFACE FORMAT:
x
SIGNAL FORMAT:
xxxx
INPUT:
1080I/PSF
xxxxx
24PSF:
xxxxx
25PSF/50I:
xxxxx
30PSF/60I:
xxxx
RGB RANGE:
When HDMI input is selected
USER CONFIG-2K/HD INPUT SETTING
xxxxxxxxx
INTERFACE FORMAT:
x
SIGNAL FORMAT:
xxxx
INPUT:
xxxx
RGB RANGE:
xx
HDMI AUTO:
Submenu Setting
INTERFACE FORMAT Displays the interface format.
For SDI input
Select one of the following three
interface formats. The SIGNAL
FORMAT item may appear
depending on the selection. Select
the SIGNAL FORMAT and
INPUT.
• SINGLE-LINK 3G/HD-SDI
• SINGLE-LINK 3G-SDI
• DUAL-LINK 3G-SDI
For HDMI input
The INTERFACE FORMAT is
fixed to SINGLE-LINK HDMI.
Select the INPUT.
SIGNAL FORMAT For SDI input
Selects the format of the SDI input
signal. The setting options appear
depending on the selection of the
INTERFACE FORMAT.
• When SINGLE-LINK 3G/HD-
SDI is selected: The SIGNAL
• When SINGLE-LINK 3G-SDI
is selected: You can select
• When DUAL-LINK 3G-SDI is
selected: You can select from
For HDMI input
This item cannot be accessed.
FORMAT is fixed to
AUTO.
from among 422 YCBCR
10BIT, 444 RGB 10BIT,
444 YCBCR 10BIT, 444
RGB 12BIT, or 444
YCBCR 12BIT.
among AUTO, 444 RGB
10BIT, 444 YCBCR 10BIT,
444 RGB 12BIT, or 444
YCBCR 12BIT.
17
Adjustment Using the Menus