Troubleshooting - Sony PVM-X300 Operating Instructions Manual

Connecting the Quad Link 3G-SDI* signal
To input 2-sample interleave division signals
Connector Input signal
SDI IN 1
3G-SDI Link 1
SDI IN 2
3G-SDI Link 2
SDI IN 3
3G-SDI Link 3
SDI IN 4
3G-SDI Link 4
To input Square division signals
Connector Input signal
SDI IN 1
Mapping signal of Sub image 1 (upper-
left screen)
SDI IN 2 Mapping signal of Sub image 2 (upper-
right screen)
SDI IN 3
Mapping signal of Sub image 3 (lower-
left screen)
SDI IN 4
Mapping signal of Sub image 4 (lower-
right screen)
Connecting the Quad Link HD-SDI signal
(Square division signal)
Connector Input signal
SDI IN 1 Mapping signal of Sub image 1 (upper-
left screen)
SDI IN 2 Mapping signal of Sub image 2 (upper-
right screen)
SDI IN 3 Mapping signal of Sub image 3 (lower-
left screen)
SDI IN 4 Mapping signal of Sub image 4 (lower-
right screen)
Screen image of the Square division
signal
Sub image 1
(upper-left screen)
Sub image 3
(lower-left screen)
* In this manual, the Square division signal is also referred to as
the Dual Link 3G-SDI or Quad Link 3G-SDI signal.
Sub image 2
(upper-right screen)
Sub image 4
(lower-right screen)

Troubleshooting

This section may help you isolate the cause of a problem
and as a result, eliminate the need to contact technical
support.
• The unit cannot be operated t A function that does
not work is assigned. Press the MENU button to check
the function assigned to the function button.
• The black bars appear at the upper/lower/left/right
positions, or left/right positions of the display t
When the signal aspect ratio is different from that of
the panel, the black bars appear. This is not a failure of
the unit.
• Adjustments and settings cannot be made t
Adjustments and settings may not be possible
depending on the input signals and the status of the
unit. See "Input Signals and Adjustable/Setting Items"
(page 9).
• Color is not displayed correctly t Check the
INTERFACE FORMAT, SIGNAL FORMAT,
COLOR TEMP or COLOR SPACE setting.
• It takes time to output the HDMI signal t It may
take time to output the HDMI signal when an HDCP
enabled signal is input with the resolution of
3840 × 2160 or 4096 × 2160.
In that case, remove and reattach the HDMI cable. If
the situation does not improve, replace the HDMI
cable with a new one.
23
Troubleshooting