Location And Function Of Parts And Controls; Front Panel - Sony PVM-X300 Operating Instructions Manual

Location and Function of Parts and Controls

Front Panel

a i (headphones) jack
The audio signal which is selected using the input select
button is output in stereo sound.
b Speakers
The audio signal selected using the input select button is
output in stereo.
When SDI signals are input, the audio signals of the
channels selected with AUDIO SETTING in the USER
CONFIG menu are output.
The audio signals for the speakers are also output from
the AUDIO OUT connector on the lower panel (see
page 11).
Audio signals will not be output when headphones are
connected to the i jack.
c Input select buttons
Press to monitor the signal input to each connector.
SDI button: to monitor the signal through the SDI
input connector
HDMI button: to monitor the signal through the
HDMI connector
PC button: used for future expansion
OPTION button: to monitor the signal through the
optional BKM-XP1 4K SxS Player
d Function buttons
Press to adjust or turn on/off the assigned function.
The following functions are assigned at the factory.
F1 button: BRIGHTNESS
F2 button: CONTRAST
F3 button: CHROMA
F4 button: BACKLIGHT
F5 button: NATIVE SCAN
8
Location and Function of Parts and Controls
1 2
SDI HDMI PC OPTION F1 F2 F3 F4 F5 F6 F7 BACK MENU
3 4 56
F6 button: VOLUME
F7 button: VIEW MODE
You can assign a function to the function buttons using
FUNCTION BUTTON SETTING in the USER
CONFIG menu.
For details on the assignable functions, see "Functions
assignable to the function buttons" (page 20).
e Menu operation buttons
Displays or sets the on-screen menu.
Menu selection control
When the menu is displayed, turn the control to select
a menu item or setting value, and then press the
control to confirm the setting.
If the menu is not displayed and the menu selection
control is pressed, the characters that represent the
names of the buttons light up. Also, the names of the
functions assigned to the function buttons appear on
the screen.
Alternatively, if the menu is not displayed and the
menu selection control is pressed for more than two
seconds, the signal format is displayed on the screen.
BACK button
When the menu is displayed, press the button to reset
the value of an item to the previous value (except
some items).
MENU button
Press to display the menu and the functions assigned
to the function buttons.
Press again to clear the menu.