User Config Menu - Sony LPM-770BP Operating Instructions Manual

Submenu Setting
SUB CONTROL Adjusts finely the adjustment range
of the function buttons which
CONTRAST, BRIGHTNESS,
CHROMA and PHASE are
assigned.
• CONTRAST: Adjusts the
• BRIGHTNESS: Adjusts the
• CHROMA: Adjusts color
• PHASE: Adjusts color tones.
• APERTURE: Adjusts the picture
• BACKLIGHT: Adjusts the
• VOLUME: Adjusts the volume.
PICTURE CONTROL Adjusts the picture.
• CTI (Chroma Transient
• V SHARPNESS: A crisp image
INPUT SETTING • SHIFT H: Adjusts the position of
• SHIFT V: Adjusts the position of
picture contrast.
picture brightness.
intensity. The higher the
setting, the greater the
intensity. The lower the
setting, the lower the
intensity.
The higher the setting, the
more greenish the picture.
The lower the setting, the
more purplish the picture.
sharpness.
The higher the setting, the
sharper the picture. The
lower the setting, the softer
the picture. APERTURE
does not work when the
camera focus function is
activated.
backlight. When the setting
is changed, the brightness of
the backlight is changed.
Improvement): When a low
color resolution signal is
input, a crisp image can be
displayed. When the setting
is higher, the picture
becomes even more crisp.
can be displayed. When the
setting is higher, the picture
becomes even more crisp.
the picture. As the setting
increases, the picture moves
to the right, and as the
setting decreases, the picture
moves to the left.
the picture. As the setting
increases, the picture moves
up, and as the setting
decreases, the picture moves
down.

USER CONFIG menu

The USER CONFIG menu is used for setting the
system, marker, peaking, video level marker, monitor
profile, and function button.
USER CONFIG
S Y S T E M S E T T I N G :
M A R K E R S E T T I N G :
P E A K I N G S E T T I N G :
V I D E O L E V E L M A R K E R S E T T I N G :
M O N I T O R P R O F I L E :
F U N C T I O N B U T T O N S E T T I N G :
SYSTEM SETTING
USER CONFIG – SYSTEM SETTING
N T S C S E T U P :
F O R M AT D I S P L AY:
L A N G U A G E :
P O W E R S AV I N G :
L E D B R I G H T N E S S :
R G B R A N G E :
FA C T O RY S E T T I N G :
1 8 0 ° D I S P L AY:
Submenu Setting
NTSC SETUP Selects the NTSC setup level from
two modes.
The 7.5 setup level is used mainly
in North America. The 0 setup level
is used mainly in Japan.
FORMAT DISPLAY Selects the display mode of the
signal format and scan mode.
• ON: The format and scan mode
• OFF: The display is hidden.
• AUTO: The format and scan
LANGUAGE Selects the menu or message
language from among seven
languages.
• ENGLISH: English
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
•
•
POWER SAVING Sets the power saving mode on or
off. When you set to ON, the
monitor goes into power saving
mode if no signal is input for about
one minute.
xxxxxx
xxxxxx
E N G L I S H
xxxxxx
xxxxxx
xxxxxx
xxxxxx
are always displayed.
mode are displayed for
about 10 seconds when the
input of the signal starts.
: Japanese
: Simplified Chinese
Adjustment Using the Menus
17-GB