Dodge CHARGER 2015 Owner's Manual page 293

• ParkSense®
The ParkSense® system will scan for objects behind the
vehicle when the transmission shift lever/gear selector is
in REVERSE and the vehicle speed is less than 11 mph
(18 km/h). It will provide an alert (audible and/or
visual) to indicate the proximity to other objects. The
system can be enabled with Sound Only, or Sound and
Display. To change the ParkSense® status, press and
release the "Sound Only" or "Sound and Display" but-
ton. Then press the back arrow/Done button on the
touchscreen. Refer to "ParkSense®" in "Understanding
The Features Of Your Vehicle" for system function and
operating information.
UNDERSTANDING YOUR INSTRUMENT PANEL 291
• Rear ParkSense® Chime Volume
The Rear ParkSense® Chime Volume settings can be
selected from the DID or Uconnect® System — if
equipped. The chime volume settings include LOW,
MEDIUM, and HIGH. The factory default volume setting
is MEDIUM. To make your selection, press the "Rear
ParkSense® Volume" button on the touchscreen, then
select from "Low," "Med," or "High." Press the back
arrow/Done button on the touchscreen to return to the
previous menu. ParkSense® will retain its last known
configuration state through ignition cycles.
4