Turning Lanesense On Or Off; Lanesense Warning Message - Dodge CHARGER 2015 Owner's Manual

Hide thumbs Also See for CHARGER 2015:

Table of Contents

Turning LaneSense ON Or OFF

The default status of LaneSense is "OFF".

The LaneSense button is located on the center stack

below the Uconnect® display.

To turn the LaneSense system ON, push the

LaneSense button to turn the system ON (LED

turns off). A "Lane Sense On" message is shown in the

To turn the LaneSense system OFF, push the LaneSense

button once to turn the system OFF (LED turns on).

NOTE: The LaneSense system will retain the last system

state ON or OFF from the last ignition cycle when the

ignition is changed to the ON/RUN position.

The LaneSense system will indicate the current lane drift

condition through the Driver Information Display (DID).

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205

7.0 Driver Information Display (DID) Screen — If

When the LaneSense system is ON; the lane lines are gray

when both of the lane boundaries have not been detected

and the LaneSense indicator is solid white.

System ON (Gray Lines/White Indicator)

Table of Contents