Enabling And Disabling Parksense - Dodge CHARGER 2015 Owner's Manual

216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Enabling And Disabling ParkSense®
ParkSense® can be enabled and disabled with the
ParkSense® switch, located on the switch panel below
the Uconnect® display.
ParkSense® Switch
When the ParkSense® system is disabled, the
Drivers Information Display (DID) will display
the "PARKSENSE OFF" message for approxi-
mately five seconds. Refer to "Drivers Informa-
tion Display (DID)" in "Understanding Your Instrument
Panel" for further information. When the shift lever is
moved to REVERSE and the system is disabled, the DID
will display the "PARKSENSE OFF" message for as long
as the vehicle is in REVERSE.
The ParkSense® switch LED will be ON when
ParkSense® is disabled or defective. The ParkSense®
switch LED will be OFF when the system is enabled. If
the ParkSense switch is pushed and the system is dis-
abled or requires service, the ParkSense switch LED will
blink momentarily and then the LED will be ON.