Headlight Time Delay - Dodge CHARGER 2015 Owner's Manual

Hide thumbs Also See for CHARGER 2015:

Table of Contents

• Broken, muddy, or obstructed headlights and taillights

of vehicles in the field of view will cause headlights to

remain on longer (closer to the vehicle). Also, dirt, film,

and other obstructions on the windshield or camera

lens will cause the system to function improperly.

If the windshield or Automatic High Beam Headlamp

Control mirror is replaced, the mirror must be re-aimed

to ensure proper performance. See your local authorized

1. Turn the headlight switch to the AUTO headlight

2. Push the multifunction lever away from you (toward

front of vehicle) to engage the high beam mode.

NOTE: This system will not activate until the vehicle is

at or above 15 mph (24 km/h).

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149

To Deactivate

1. Pull the multifunction lever toward you (or rearward

in car) to manually deactivate the system (normal

operation of low beams).

2. Push back on the multifunction lever to reactivate the

Headlight Time Delay

This feature provides the safety of headlight illumination

for up to 90 seconds when leaving your vehicle in an

To activate the delay feature, turn OFF the ignition switch

while the headlights are still on. Then, turn off the

headlights within 45 seconds. The delay interval begins

when the headlight switch is turned off.

NOTE: The lights must be turned off within 45 seconds

of turning the ignition OFF to activate this feature.

Table of Contents