Setting The Level Of The Subwoofer (Subwoofer Level) - Sony STR-ZA5000ES User Manual

[138] Adjusting Settings HDMI Setup

Setting the level of the subwoofer (Subwoofer Level)

You can set the level of the subwoofer to 0 dB or +10 dB when multi-channel PCM signals are
input via an HDMI connection. The level for each input to which an HDMI input jack is assigned
can be set independently.
1 Select [Setup] - [HDMI Setup] from the home menu.
2 Select [Subwoofer Level].
3 Select the setting you want.
Auto: Automatically sets the level to 0 dB or +10 dB, depending on the audio stream.
+10 dB
0 dB
[139] Adjusting Settings HDMI Setup
Selecting the method to use the HDMI OUT B (ZONE 2)
jack (HDMI Out B Mode)
You can use the HDMI OUT B (ZONE 2) jack can be used for the Zone 2 output.
Select [Setup] - [HDMI Setup] from the home menu.
1
Select [HDMI Out B Mode].
2
Select the setting you want.
3
Main: Uses the jack for the main zone output. Recommended when you enjoy TV or
projector content in only one room (main zone).
Zone2: Uses the jack for the Zone 2 output. Recommended when you enjoy video and
sound from a device connected to the receiver in a zone other than the main zone
(Zone 2).
Note
When [Zone2] is selected, the Control for HDMI function and Fast View function do not work.
When [Main] is selected, HDMI IN audio signals cannot be output to Zone 2 speakers and the PRE
OUT jacks unless the input for Zone 2 is SOURCE or the same input is selected in the main zone
and Zone 2.
[140] Adjusting Settings HDMI Setup
Setting the priority for the main zone (Priority)
Lets you set the priority when you select the same input for both the main zone and Zone 2.
Select [Setup] - [HDMI Setup] from the home menu.
1
Set [Priority].
2
Main & Zone2: You can enjoy the same input in the main zone and Zone 2. However,
there may be some interference in the audio and video signals in the main zone and
Zone 2.
Main Only: You can enjoy good audio and video quality in the main zone. There is no
output in Zone 2.
Note
This function is enabled only when [HDMI Out B Mode] is set to [Zone2].