Changing The Settings On The Transmitter; Group/Channel Setting (Gp/ Ch); Transmission Power Setting (Rf Power); Audio Input Level Setting (Input Level) - Sony DWR-S01D Operating Instructions Manual

Changing the
Settings on the
Transmitter
For details on menu operation, see "Basic Menu
Operations" on page 19.
You can change the settings on the
transmitter that is paired with this receiver
using the group/channel setting of the RX1/
2 menu or the TX1/2 menu.
The following shows the US model display.
Receiver
Group/Channel Setting
CH)
Only this setting is set through the GP/CH
indication of the RX1/2 menu.
For details, see "Selecting the Group/Channel" on
page 13.
28

Changing the Settings on the Transmitter

Transmitter
(GP/
Transmission Power
Setting
(RF POWER)
You can change the transmission power of
the transmitter.
Audio Input Level Setting
(INPUT LEVEL)
When the input of the transmitter is set to
MIC, the value of the attenuator can be
changed.
The attenuator values that can be selected
depend on the transmitter function.
Low-cut Filter Setting
The low-cut filter setting of the transmitter
can be changed.
Note
The frequency selection depends on the
transmitter function.
Power-saving Setting
(POWER SAVE)
To conserve power, this setting allows you
to change the transmitter to sleep mode
using the wireless remote control function.
Note
When the transmitter changes to sleep
mode, transmission of the RF audio signal
and metadata is stopped. For this reason,
"NO DATA" appears for all items in the
TX1/2 menu, except for "SLEEP" in the
POWER SAVE indication.
+48V Power Setting
Turns the +48V on the transmitter on or off.
(LCF)
(+48V)