Power-Saving Setting (Power Save); Setting The Audio Input Level (Input Level); Transmission Power Setting (Rf Power); Power Setting (+48V) - Sony DWR-S03D Operating Instructions Manual

Power-saving setting
To conserve power, this setting allows you to change the
transmitter to sleep mode using the wireless remote control
function.
Note
When the transmitter changes to sleep mode, transmission
of the RF audio signal and metadata is stopped. For this
reason, "NO DATA" appears for all items in the TX1/2
menu, except for "SLEEP" in the POWER SAVE
indication.
Setting the audio input level
LEVEL)
You can set the input level to the transmitter.
Transmission power setting
You can change the transmission power of the transmitter.
Note
Always perform pairing after changing the maximum RF
output power setting for a transmitter. If you fail to do so,
configuration of RF output power settings via the wireless
remote control function may become impossible.
For details on pairing, see "Pairing with a transmitter" on
page 18.
+48V power setting
Turns the +48V on the transmitter on or off.
Note
This function may not be supported depending on the
transmitter.
Battery level display setting
REMAIN)
This sets the display method for the transmitter battery
level.
(POWER SAVE)
(INPUT
(RF POWER)
(+48V)
(BATT
20