Storage Expansion Enclosure Settings; Installing An Sfp Module And Lc-Lc Cable In A Ds4800; Installing An Sfp Module And Connecting An Lc-Lc Cable To The Storage Expansion Enclosures - IBM DS4800 User, Installation And Maintenance Manual

Figure 56. Installing an SFP module and LC-LC cable in a DS4800
Install an SFP module in the SFP port on the back of the storage expansion
enclosures; then, connect the other end of the LC-LC cable into the SFP module,
as shown in Figure 57.
Figure 57. Installing an SFP module and connecting an LC-LC cable to the storage
expansion enclosures
For important information about connection rules and recommendations, see 4 on
page 67.

Storage expansion enclosure settings

This section provides information about storage expansion enclosure settings. For
additional detail, refer to the Installation, User's, and Maintenance Guide for your
storage expansion enclosure.
SFP
module
Fiber-optic
cable
Chapter 3. Cabling the storage subsystem
77