Cabling The Storage Expansion Enclosures To A Ds4800 Storage Subsystem; One Ds4800 To Seven Exp810 And Eight Exp710 Storage Expansion Enclosures - Recommended Cabling - IBM DS4800 User, Installation And Maintenance Manual
Ibm system storage ds4800 storage subsystem
Hide thumbs
Also See for DS4800:
- Installation, user and maintenance manual (250 pages) ,
- Installation and cabling manual (8 pages) ,
- Update manual (37 pages)
Table of Contents
Advertisement
enclosures operating at 2 Gbps Figure 55 shows the recommended cabling
scheme.
Figure 55. One DS4800 to seven EXP810 and eight EXP710 storage expansion enclosures — Recommended cabling
Cabling the storage expansion enclosures to a DS4800 storage
subsystem
Complete the following steps to cable the storage expansion enclosures to a
DS4800 Storage Subsystem:
Install an SFP module in the drive mini hub port on the back of the DS4800 Storage
Subsystem, as shown in Figure 56 on page 77.
Connect an LC-LC fiber-optic cable into the SFP module, as shown in Figure 57 on
page 77.
76
IBM System Storage DS4800 Storage Subsystem: Installation, User's, and Maintenance Guide
Advertisement
Table of Contents
