FlexiEngrave Configuration for
ADA/Braille Signage.
Launch FlexiEngrave.
Setup Braille job and appropriate toolpaths in accordance with ADA
Laws, guidelines and regulations. Please refer to software
documentation for generating Braille data.
Select the entire graphic (pictogram, text and Braille) and click on the
Engrave icon. This will launch the Production Manager.
Setup and configure the engraver driver. Refer to the SAi
documentation for details.
In the General tab select the Braille toolpath and ensure that the
Material size matches what is installed on the engraver.
Select the Panel tab and ensure that Panel to Border is selected.