FlexiEngrave Configuration for
ADA/Braille Signage.
Click on the options tab and double click the 0.060in. Braille tool.
Set the XY Velocity to 100mm/sec., Z Velocity to 2mm/sec. And
Spindle RPM to 14000RPM and click Apply.
Configure the engraver and the Raster
Send to output the Raster
Once Braille drill has been engraved, lower the Raster
attachment for inserting the Raster
Braille drill tool and select
TM
Braille to the engraver.
TM
TM
beads.
TM
Pen