BMW R1200S Rider's Manual page 92

7
90
Install screw 1.
Replacing rear turn
indicator bulb
z
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcy-
cle is steady on its stand.
Make sure the ground is
level and firm and park the
motorcycle.
Remove screw 1.
Pull glass on screw con-
nection side out of mirror
housing.
Remove bulb 2 from light
housing by turning it coun-
terclockwise.
Replace defective bulb.
Bulb of rear turn indica-
tors
R10W / 12 V / 10 W