BMW R1200S Rider's Manual page 91

Replacing front turn
indicator bulb
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcy-
cle is steady on its stand.
Make sure the ground is
level and firm and park the
motorcycle.
Switch off ignition.
Remove screw 1.
Pull lamp housing on screw
connection side out of mir-
ror housing.
Remove bulb holder 2 from
lamp housing by turning it
counterclockwise.
Remove bulb 3 from bulb
holder.
Replace defective bulb.
Bulb of front turn indica-
tors
R10W / 12 V / 10 W
Insert bulb 3 into bulb sock-
et.
Install bulb socket 2 in lamp
housing by turning clock-
wise.
Insert lamp housing in mir-
ror housing.
7
89
z