BMW R1200S Rider's Manual page 82

During the following
7
work, parts of the front
brake, in particular of the
80
BMW Motorrad ABS, can be
damaged.
Take care not to damage the
brake system, in particular the
ABS sensor with cable and
the ABS sensor ring.
The front wheel must be
installed right way round
to rotate in the correct direc-
tion.
z
Observe the direction of rota-
tion arrows on the tires or on
the rim.
Mount spacing bushing 7
on left side on wheel hub.
Roll front wheel into front
forks.
With OE Anti-Lock Brake
System (ABS):
When rolling in wheel,
watch ABS sensor on left
side.
Lift front wheel and install
quick-release axle 6 with
appropriate torque.
Quick-release axle in
axle mount
37 lb/ft (50 Nm)
Tighten axle clamping
screw 5 with appropriate
torque.
Clamping screw for
quick-release axle
14 lb/ft (19 Nm)
Remove front wheel stand.
Ease brake calipers onto
brake disks.