BMW R1200S Rider's Manual page 83

With OE Anti-Lock Brake
System (ABS):
The cable of the ABS
sensor could chafe
through if it comes into
contact with the brake disk.
Ensure installation of the ABS
sensor cable close to the
front suspension.
Route ABS sensor cable 4
as shown in picture.
Install mounting screws 2
with appropriate torque.
Brake caliper on slider
tube
22 lb/ft (30 Nm)
Remove adhesive tape from
wheel rim.
Insert mudguard in brack-
et 1.
Install screws on left and
right.
Operate brakes several
times until brake pads
contact brake disk.
Remove a rear wheel stand
if mounted.
Removing rear wheel
Components of the ex-
haust system can be
hot.
Do not touch hot parts of the
exhaust system.
7
81
z