If you decide that you would like
8
to fit non-standard wheels to
your motorcycle, it is very im-
104
portant to consult a specialist
workshop beforehand, preferably
an authorised BMW Motorrad
dealer. In some cases, the data
programmed into the control
units can be changed to suit the
new wheel sizes.
Removing front wheel
Make sure the ground is level
and firm and place the motor-
z
cycle on its stand.
Remove screw 1 and remove
the wheel-speed sensor from
its bore.
ATTENTION
Brake pads pushed together
with brake caliper removed.
It is not possible to slip the brake
caliper over the brake disc.
Do not operate the brake lever
while a brake caliper has been
removed.
Remove screws 1 of the brake
callipers on left and right.