BMW F 800 GS Adventure Rider's Manual page 48

4
46
Press and hold down button 1
until the ABS telltale and warn-
ing light changes status.
z
ABS telltale and warning
light shows.
with Automatic Stability Control
OE
(ASC)
Initially, the ASC symbol
changes status. Press and
hold down button 1 until the
ABS telltale and warning
light responds. Under these
circumstances, there is no
change in the ASC setting.
Release button 1 within two
seconds.
ABS telltale and warning
light remains on.
The ABS function is deactiv-
ated.
Activating the ABS
function
Switch on ignition (
NOTICE
Switch the ABS function on at
standstill only.
Press and hold down button 1
until the ABS telltale and warn-
ing light changes status.
ABS telltale and warning
light goes out; if self-
diagnosis has not completed it
starts flashing.
Release button 1 within two
seconds.
ABS telltale and warning
light remains off or contin-
ues to flash.
The ABS function is activated.
You also have the option of
switching the ignition off and
then on again.
NOTICE
An ABS fault has occurred if the
ABS telltale and warning light
36).
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.