BMW F 800 GS Adventure Rider's Manual page 119

Remove screw 1.
Pull the glass out of the light
housing at the threaded-
fastener side.
Press bulb 1 in, turn it counter-
clockwise and remove it from
the light housing.
Installing bulbs for front
and rear turn indicators
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Press bulb 1 in and turn it
clockwise to install it in the
light housing.
Working from the inboard side,
insert the glass into the light
housing and close the housing.
8
117
z