BMW F 800 GS Adventure Rider's Manual page 112

with centre stand
8
Make sure the ground is level
and firm and place the motor-
110
cycle on its centre stand.
z
Remove screw 1 and remove
the speed sensor from its bore.
OE
Remove axle nut 1.
Slacken locknuts 2 on left and
right by turning them counter-
clockwise.
Back off adjusting screws 3 on
left and right by turning them
counter-clockwise.
Remove adjusting plate 4 and
push the axle in as far as it will
go.
Remove quick-release axle 1
and remove adjusting plate 2.
Support the wheel.
Roll the rear wheel as far
forward as possible and