Preparation For Disassembly - Compaq 5000 - Professional - 32 MB RAM Maintenance And Service Manual

Product Description
Home
Removal & Replacement
REMOVAL & REPLACEMENT
DISASSEMBLY
SEQUENCE

Preparation for Disassembly

Electrostatic
discharge
To prepare the computer for removal and replacement procedures, complete the following steps:
Service
considerations
1 Remove any diskette, compact disc, or tape from the computer.
2 Turn off the computer and any peripheral devices that are connected to the
Preparation
computer.
for
disassembly
Serial number
Hood
Fax-modem
3 Disconnect the power cord from the electrical outlet, and then from the
computer.
System board
4 Disconnect all peripheral device cables from the computer.
bracket
Serial port
assembly
Mass storage
devices
System board
components
Power supply
Front bezel
Instant On
button board
Creativity
Action Center
Maintenance and Service Guide
Compaq Presario 4900, 5000, & 5100 Series Computers
Jumper & Switch Information
CAUTION: The computer power switch should
be turned off before you disconnect any cables.
IMPORTANT: During disassembly, label each cable as you remove
it. Be sure to note its position and routing.
Troubleshooting Illustrated Parts Catalog
Specifications