Quick Guide - Panasonic Palmcorder MultiCam PV-GS2 Operating Instructions Manual

Quick Guide

1 Attach the Battery to the AC Adaptor and
charge it.
• Before use, fully charge the Battery.
• Since the Battery will not be charged when the DC
Cable is connected to the AC Adaptor, disconnect
it from the AC Adaptor.
• The [POWER] Lamp and [CHARGE] Lamp light
up, and charging starts.
• When the [CHARGE] Lamp goes off, charging is
completed.
2 Attach the charged Battery to the Camcorder.
Inserting a Cassette
1 Slide the [OPEN/EJECT] Lever
front and pull down to fully open the Cassette
Compartment Cover.
• To protect the tape, if the cover is not fully opened,
the cassette cannot be ejected.
2 Insert a Cassette.
3 Close the Cassette Holder by pressing the
[PUSH] mark .
2
4 Close the Cassette Compartment Cover by
pressing the mark
2
8
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
toward the
1
1
.
3
3
Before Use
Inserting a Card
1 Place your Thumb on the [OPEN▼]
and pull the LCD Monitor
direction of the arrow.
2
1
2 Slide the [OPEN] Lever
Slot Cover
4
3 While holding the Memory Card with its cut
corner facing right
Slot .
6
4 Close the Card Slot Cover
Using the Viewfi nder
Before using the Viewfi nder, adjust the fi eld of view so
that the displays inside the Viewfi nder become clear
and easy to read.
1 Pull the Viewfi nder.
2 Adjust by turning the Eyepiece Corrector
Knob .
1
1
Recording on a Tape
1 Set the [OFF/ON] Switch
• The [POWER] Lamp
1
2
out in the
2
to open the Card
3
.
insert it into the Card
5
securely.
4
3
to [ON].
1
lights up.
2
Knob
1
4
6
5