Playback Digital Effect Functions; Playing Back A Memory Card - Panasonic Palmcorder MultiCam PV-GS2 Operating Instructions Manual

To Change the Zoom Magnifi cation
2 Change the magnifi cation by pressing the [W]
Button or [T] Button
Control.
To Change the Enlarging Area of an Image
3 Press the Arrow Button (▲, ◄, ►, ▼)
the Remote Control that points to the area
you want to enlarge.
To Cancel the Playback Zoom Function
Press the [P.B. ZOOM] Button
Control.
• For other notes concerning this item, see page 59.

Playback Digital Effect Functions

During playback, special digital effects can be added
to the recorded pictures. The same effects as those of
Digital Effects 1 and 2, which are used during
recording, are obtained.
1 Press the [►] Button
68
2 Press the [SELECT] Button
Remote Control to select a desired digital
effect.
55
57
• When the [SELECT] Button is pressed repeatedly,
the digital effect selection changes.
• The same setting can be done using [EFFECT
SEL] Sub-Menu on the [TAPE PLAYBACK MENU].
To suspend Playback Digital Effect Temporarily
Press the [OFF/ON] Button
restart the digital effect. When the digital effect is
paused temporarily, the selected effect's indication
fl ashes.
• The same operating can be done using [EFFECT
ON] Sub-Menu on the [TAPE PLAYBACK MENU].
To Cancel the Digital Effect
Press the [SELECT] Button
Remote Control and clear the digital effect
indication.
36
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Playback Mode
on the Remote
58
58
on
52
on the Remote
70
.
68
on the
55
to suspend or
57
repeatedly on the
55
Wipe Mode and Mix Mode (Optional
Remote Control Only)
• This feature is only available with Remote Control.
However it is not supplied. If you would like to order,
the parts number is LSSQ0411 as a replacement
parts. Please refer to page 69.
1 Press the [►] Button
68
2 Press the [SELECT] Button
Remote Control and select [WIPE] or [MIX].
55
56
57
3 Press the [STORE] Button
you want to save as a still picture.
• The [ ] or [
WIPE MIX
the image is saved.
4 Press the [OFF/ON] Button
in which you want to use the Wipe or Mix
effect.
• The scene changes as a result of the Wipe or Mix
effect.
• The Wipe Function and Mix Function can only
be accessed by using the Remote Control during
playback.
• If the [OFF/ON] Button
Mix is carried out, the effect will stop temporarily at
that point. Pressing the [OFF/ON] Button
will bring back the effect.
• For other notes concerning this item, see page 59.

Playing Back a Memory Card

It plays back fi les recorded on a Card.
1 Set the Mode Dial
36
Mode.
36
2 Start Playback.
► : Starting the Slide Show
: Playing back the next picture
: Playing back the previous picture
: Stop the Slide Show
Pause the Slide Show
:
.
68
on the
55
at the moment
56
] Indication appears, and
in the scene
57
57 is pressed while Wipe or
again
57
to Picture Playback