Editing Mode; Recording From A Tape Onto A Card; Recording Pictures From A Card Onto A Tape; Audio Dubbing (Optional Remote Control Only) - Panasonic Palmcorder MultiCam PV-GS2 Operating Instructions Manual

Editing Mode

Recording from a Tape onto a Card

Still pictures can be recorded on the Memory Card
from scenes that have already been recorded on a
cassette.
1 Set the Mode Dial
36
36
2 Start playback and set the Camcorder to Still
Playback Mode at the scene you wish to
record, and press the [PHOTO SHOT] Button
.
33
33
Recording Pictures from a Card onto
a Tape
Card Images can be recorded to the Tape.
1 Set the Mode Dial
36
Mode.
36
2 Display the fi rst picture.
3 Press the [PHOTO SHOT] Button
33
• During the copying, the following Indication
appears.
• It takes a few seconds to record a picture to the
Tape.
Editing Mode
to Tape Playback Mode.
to Picture Playback
.
33
• When recording to tape, select the tape position
before recording. The picture will be recorded to the
tape position when the [PHOTO SHOT] Button is
pressed at Step 3.
• Photoshot index signals are automatically recorded.
• For other notes concerning this item, see page 60.
Audio Dubbing (Optional Remote
Control Only)
• This feature is only available with Remote Control.
However it is not supplied. If you would like to order,
the parts number is LSSQ0411 as a replacement
parts. Please refer to page 69.
You can add music or narration to the recorded
Cassette.
• If the tape recorded in the [16bit] Mode is dubbed
with the Audio Dubbing function, the original sound
is erased. (If you wish to preserve the original sound,
use the [12bit] Mode when recording.)
• Audio Dubbing cannot be performed on a recording
made in LP Mode. (p. 21)
1 Press the [ ] Button
Control where you want to add new sound.
2 Press the [A.DUB] Button
Control.
3 To start Audio Dubbing, press the [
on the Remote Control.
65
To Cancel Audio Dubbing
Press the [ ] Button
65
The Camcorder is in the Still Playback Mode again.
To Play Back the Sound Recorded by 12bit
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK] >>
[12bit AUDIO] >> [ST1], [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Dubbing.
MIX: It plays back both the original sound and the
sound added by Audio Dubbing
simultaneously.
on the Remote
65
51
65
on the Remote
51
] Button
on the Remote Control.
41