Copying On An S-Vhs (Or A Vhs) Cassette; Using The Dv Cable For Recording - Panasonic Palmcorder MultiCam PV-GS2 Operating Instructions Manual

To Dub Audio While Listening to a Pre-recorded
Sound
When pausing the audio dubbing, set the [12bit
AUDIO] on the [PLAYBACK] Sub-Menu to [ST2]
and you can check the pre-recorded sound.
When the line input is used, you can dub audio
while listening to the pre-recorded sound from the
speaker.
• For other notes concerning this item, see page 60.
Copying on an S-VHS (or a VHS)
Cassette
( Dubbing)
After connecting the Camcorder and the VCR as
illustrated, start the following procedures.
AV Cable
1
• Be sure to press the [OSD] Button (p. 11) on the
Remote Control (Optional) prior to copying so that no
indications are visible. Otherwise, the displayed tape
counter and function indications are also copied.
Camcorder:
1 Insert the recorded Cassette.
VCR:
2 Insert an unrecorded Cassette with an
erasure prevention tab.
• If various setups (such as external input, tape
speed, etc.) are required, please refer to the
operating instructions of your VCR.
Camcorder:
3 Press the [►] Button to start playback.
42
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Editing Mode
[VIDEO IN]
[AUDIO IN]
1
VCR:
4 Start recording.
5 Press the Pause or Stop Button to stop
recording.
Camcorder:
6 Press the [ ] Button to stop playback.

Using the DV Cable for Recording

(Digital Dubbing)
By connecting this Camcorder with other digital video
equipment (such as another Camcorder of the same
format/model) that has a DV input/output Terminal, and
using a 4-pin to 4-pin DV Interface Cable PV-DDC9
(optional) , high quality images and sounds can be
1
dubbed in the digital mode.
Player/Recorder:
1 Insert the Cassette and set to Tape Playback
Mode.
Player:
2 Press the [►] Button
68
66
Recorder:
3 While pressing the [ REC] Button
the [PLAY] Button
68
(Optional). Or while pressing the [REC]
Button , press the [BACK LIGHT] Button
7
on the Camcorder.
10
7
10
• Recording starts.
To Stop Dubbing
Press the [ ] Button
65
1
to start playback.
68
50
65
, press
50
on the Remote Control
or the [ ] Button .
66