BMW K 1300 R Rider's Manual page 98

8
96
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
z
that they cannot be slipped back
over the brake disc on reas-
sembly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove securing screws 2 of
the left and right brake calipers.
Force the brake pads 3 slightly
apart by rocking brake caliper 4
back and forth against brake
disc 5.
Carefully pull the brake calipers
back and out until clear of the
brake discs.
Remove screw 1 and remove
the ABS sensor from its bore.
Place the motorcycle
on an auxiliary stand;
BMW Motorrad recommends
the BMW Motorrad rear-wheel
stand.
Install the rear-wheel stand
( 104).
with centre stand generation
OA
II
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.