BMW K 1300 R Rider's Manual page 44

Set the clock only when the mo-
4
torcycle is stationary.
Switch on the ignition.
42
without on-board computer
without tyre pressure monitor-
OE
ing (RDC)
z
Repeatedly press button 1 or
button 2 until the odometer
reading appears on the
display.
with on-board computer
or
with tyre pressure monitoring
OE
(RDC)
OE
Repeatedly press button 2 un-
til the clock appears on the
display.
OE
Press and hold down the but-
ton until the hours number 3
flashes.
Repeatedly press the button
until the hours number is cor-
rect.
Press and hold down the but-
ton until the minutes number 4
flashes.
Repeatedly press the button
until the minutes number is
correct.
Hold down the button until the
minutes number stops flashing.
This completes the process.