BMW K 1300 R Rider's Manual page 100

8
Quick-release axle in
threaded bush
98
50 Nm
Tighten right axle clamping
screw 2 to the specified tight-
ening torque.
Clamping bolt in wheel
carrier
19 Nm
Remove the front-wheel stand.
z
without centre stand generation
OA
II
Remove the rear-wheel stand.
Insert the ABS sensor into its
bore and install screw 1.
Ease the brake calipers on to
the brake discs.
Install securing screws 2 on
left and right and tighten to
specified tightening torque.
Front brake caliper to
wheel carrier
30 Nm