Lights - BMW K 1300 R Rider's Manual

with on-board computer
or
with tyre pressure monitoring
OE
(RDC)
Press and hold down button 2
until the tripmeter reading in
panel 3 has reset.
Resetting the average
values
with on-board computer
Switch on the ignition.
Select average consumption or
average speed.
OE
Press and hold down button 1
until the reading in panel 4 has
reset.

Lights

Side light
The side lights switch on auto-
matically when the ignition is
switched on.
The side lights place
OE
a strain on the battery.
Do not switch the ignition
on for longer than absolutely
necessary.
Low-beam headlight
The low-beam headlight switches
on automatically when you start
the engine.
When the engine is not
running you can switch on
the lights by switching on the ig-
nition and either switching on the
high-beam headlight or operating
the headlight flasher.
High-beam headlight and
headlight flasher
Push switch 1 forward to
switch on the high-beam
headlight.
4
45
z