8
100
Slacken screw 3 on the clamp
so that the clamp can just be
turned.
Do not remove the sealing
z
grease from the clamp.
Remove screw 4 from the rear
footrest while supporting the
end silencer.
First turn the end silencer
slightly downwards and then
turn it out.
Engage first gear.
Remove five screws 1 from the
rear wheel, while supporting
the wheel.
If you are using the
BMW Motorrad rear-wheel
stand: remove the retaining
disc.
Lower the rear wheel to the
ground and roll it out to the
rear.
If you are using the
BMW Motorrad rear-wheel
stand: reinstall the retaining
disc.