Setting Date And Time - Panasonic NV-GS120GN Operating Instructions Manual

3) [PRINT]
Printing Setting Sub-Menu
[THIS PICTURE]
Printing Only the Displayed Picture
[DATE]
Printing with Recording Date
4) [DIGITAL]
Playback Digital Setup Sub-Menu
[TITLE IN]
Adding a Title
-40-
5) [DISPLAY]
Display Setup Sub-Menu
≥All of the items on the [DISPLAY] Sub-Menu are
the same as those on the [DISPLAY] Sub-Menu
of the [TAPE RECORDING MENU].
6) [LCD/EVF]
Adjusting Brightness and Colour Level
≥All of the items on the [LCD/EVF] Sub-Menu are
the same as those on the [LCD/EVF] Sub-Menu
of the [TAPE PLAYBACK MENU].
7) [INITIAL]
Initial Setup Sub-Menu
[AV JACK]
AV Socket
-67-
[REMOTE]
Remote Controller Mode
ª
[MPEG4 PLAYBACK MENU]
(NV-GS200 only)
MPEG4 Playback Mode
MPEG4 PLAYBACK MENU
DELETE
EDITING
DISPLAY
LCD/EVF
INITIAL
;/∫:SELECT
1) [DELETE]
Deleting a File Sub-Menu
[FILE BY SEL]
Selecting and Deleting a File
[ALL FILES]
Deleting All Files
-42-
2) [EDITING]
Editing a File Sub-Menu
[FILE LOCK]
Setting the Lock
-42-
[CARD FORMAT]
Formatting a Card
-42-
3) [DISPLAY]
Display Setup Sub-Menu
[SCREEN]
Screen Setting
-43-
[DISPLAY]
Display Mode
-53-
[DATE/TIME]
Date and Time Indication
4) [LCD/EVF]
Before Use
-49-
-49-
-8-
! FILE BY SEL
ALL FILES
%:NEXT
MENU:EXIT
-42-
-53-
Adjusting Brightness and Colour Level
≥All of the items on the [LCD/EVF] Sub-Menu are
the same as those on the [LCD/EVF] Sub-Menu
of the [TAPE PLAYBACK MENU].
5) [INITIAL]
Initial Setup Sub-Menu
≥All of the items on the [INITIAL] Sub-Menu are
the same as those on the [INITIAL] Sub-Menu
of the [PICTURE PLAYBACK MENU].

Setting Date and Time

Since the internal clock of the Movie Camera has
a slight imprecision, make sure to check the time
before recording.
STILL
ENTER
s
FADE
(14)
MENU
1
Set [TAPE RECORDING MENU] or
[CARD RECORDING MENU] >> [INITIAL] >>
[CLOCK SET] >> [YES].
CLOCK SET
1 YEAR
MONTH
DAY
HOUR
MIN.
; / ∫ :SELECT & / % :SETUP
2
Press the [;/∫] Button to select [YEAR],
[MONTH], [DAY], [HOUR] or [MIN.] and
press the [6/5] Button to set it to the
desired value.
≥Year will cycle in the order shown below.
2000, 2001, ..., 2089, 2000, ...
3
Press the [MENU] Button
setting the date and time.
≥The clock operation starts from [00] second.
≥If the built-in battery is weak, the [0] or [--]
Indication flashes. In this case, charge the
built-in battery.
≥The clock uses the 24-hour system.
-18-
i
2004
10
8
14
30
! /MENU:EXIT
(14) to finish