Initializing The Modes - Panasonic NV-GS120GN Operating Instructions Manual

MPEG4: Moving Picture (MPEG4)
(NV-GS200 only)
WEB : WEB CAMERA Mode (recording)
-50-
WEB : WEB CAMERA Mode (playback)
-50-
PRINT (Highlighted):
PictBridge Mode
0h00m00s: Recording time of MPEG4
(NV-GS200 only)
VOLUME: Volume adjustment
15:30:45: Date/Time Indication
N (F, E): Photoshot Picture Quality (during
Photoshot recording)
[F] means Fine, [N] means
Normal and [E] means Economy.
-22-
, , , : MPEG4 Picture Quality
E N F SF
(NV-GS200 only)
0: Remaining Number of Photoshot
pictures
R:0h00m: Remaining time of MPEG4
(NV-GS200 only)
: Continuous Photoshot Recording
-23-
: Lock Setting
¥ (White):
DPOF Setting completed (set to
1 or more picture)
: [1760k1320] Image size
1760
(NV-GS200 only)
: [1536k1152] Image size
1536
(NV-GS120 only)
: [640k480] Image size
640
≥For images not recorded with this Movie
Camera, the size display is determined as
follows according to the number of horizontal
pixels.
: 640 or more, less than 800 (The
640
size is not displayed at under
640 pixels.)
: 800 or more, less than 1024
SVGA
: 1024 or more, less than 1280
XGA
: 1280 or more, less than 1600
SXGA
: 1600 or more, less than 2048
UXGA
: 2048 or more
QXGA
(Cyan): Photoshot Mode
PICTURE
(Red): While Photoshot recording is
PICTURE
activated
(Green): While the card is being read
PICTURE
(Red): No Card (Still Picture Mode)
PICTURE
(Cyan): Moving Picture (MPEG4)
MPEG4
Recording Mode (NV-GS200
only)
(Red): While Moving Picture (MPEG4)
MPEG4
recording is activated
(NV-GS200 only)
Others
-39-
-48-
-35-
-24-
-42-
-41-
-53-
ß:
Video Flash turned on
ß
i:
Video Flash (setting to [i])
(NV-GS200 only)
ßj:
Video Flash (setting to [j])
(NV-GS200 only)
£:
Red Eye Reduction
ª To Change the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Counter Display
Mode to Tape Counter Indication [COUNTER]
(0:00.00), Memory Counter Indication [MEMORY]
(M0:00.00), and Time Code Indication
[TIMECODE] (0h00m00s00f). (
pressing the [DISPLAY] Button on the Remote
Controller, you can change the Counter Display
Mode.
ª To Display Date/Time Indication
To display Date/Time Indication, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY] Sub-Menu. (
You can also press the [DATE/TIME] Button of
the Remote Controller repeatedly to display or
change the Date/Time Indication.
ª To Change the Display Mode
By changing [DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Display Mode to
All Function Display [ALL] and Minimum Display
[OFF]. ( )
-15-
ª Progressive Photoshot
You cannot use the Progressive Photoshot
Function in the following cases.
When using Tape Recording Mode
≥Digital Effect Modes in [EFFECT1]
≥Digital Zoom [D.ZOOM]
≥1/750 s or faster shutter speed
≥When brightness is insufficient
≥When the Night View Function is ON
≥When the Portrait Mode is used
When using Card Recording Mode
≥When brightness is insufficient
≥When the Night View Function is ON

Initializing the Modes

You can change the Menu settings back to the
shipping condition.
1
Set [TAPE RECORDING MENU] or
[CARD RECORDING MENU] >> [INITIAL] >>
[INITIAL SET] >> [YES].
≥The initializing takes a little while.
≥After the initializing is completed, the
[COMPLETED] Indication appears.
≥Initializing will not erase the clock setting (
that has been adjusted.
-32-
-32-
-32-
-32-
) By repeatedly
-15-
)
-15-
)
-18-