Using A Card; Turning On The Movie Camera; Selecting Modes - Panasonic NV-GS120GN Operating Instructions Manual

Using a Card

A Card can be used to record pictures.
ª Caution before inserting/removing a
Card
Be sure to turn off the Movie Camera.
≥Otherwise, the Movie Camera may not function
properly or it may cause the loss of recorded
data in a Card.
ª Inserting a Card
1
Slide the [OPEN] Lever
Slot Cover (4) .
(6)
OPEN
2
While holding the Memory Card with its cut
corner on top 1, insert it into the Card Slot.
3
Close the Card Slot Cover
Removing the Card
Open the Card Slot Cover and then pull the Card
straight out.
≥After removing the Card, close the Card Slot
Cover.
ª [ACCESS] Lamp
(9)
ACCESS
While the Movie Camera is accessing the Card
(reading, recording, playback or erasing), the
[ACCESS] Lamp lights up.
≥While the [ACCESS] Lamp is on, never attempt
to open the Card Slot Cover, to pull out the
Card, to turn off the Movie Camera. Such
actions will damage the Card, and recorded
data, and cause the Movie Camera to
malfunction.
Before Use
(6) to open the Card
(4)
1
(4) securely.
(9)

Turning on the Movie Camera

When the Movie Camera is turned on with the
Lens Cap on, the Automatic White Balance
Adjustment may not function properly. Please
turn on the Movie Camera after removing the
Lens Cap.
ª How to Turn on the Power
1
Set the [OFF/ON] Switch
pressing the button 1.
≥The Power Lamp
(41)
ON
1
(43)
ª How to Turn off the Power
1
Set the [OFF/ON] Switch
pressing the button 1.
(43)

Selecting Modes

You can choose a desired mode by rotating the
Mode Dial.
1
Rotate the Mode Dial
(39)
: Tape Recording Mode
Use this mode when recording pictures on a tape.
Also, you can record still pictures on the card
simultaneously during recording on a tape.
: Tape Playback Mode
Use this mode when playing back the recorded
scene on a tape.
: Card Recording Mode
Use this mode when recording still picture or
moving picture on a card. (moving picture on
NV-GS200 Model only)
: Picture Playback Mode
Use this mode when playing back the recorded
still picture on a card.
: MPEG4 Playback Mode (NV-GS200 only)
Use this mode when playing back the recorded
moving picture on a card.
-12-
(43)
to [ON] while
(41)
lights up.
(43)
to [OFF] while
ON
1
(39)
.