2.16 Bluetooth Troubleshooting
To check if the computer's Bluetooth is malfunctioning or not, follow the troubleshooting
procedure below as instructed.
Procedure 1
Procedure 2
The Bluetooth function is connected to system board. If Bluetooth malfunctions, its
connection is defective or Bluetooth cable and system board may be faulty.
Check 1 Make sure Bluetooth cable is firmly connected to the connector CN9(Santa Rosa)
or CN13(NAPA). If the problem still occurs, perform Check 2.
Check 2
Bluetooth cable may be faulty. Replace it with a new one. If the problem s till
occurs, perform Check 3.
Check 3
Bluetooth may be faulty. Replace it with a new one following the steps in Chapter
4. If the problem still occurs, perform Check 4.
Check 4
System board may be faulty. Replace it with a new one following the instruction in
Chapter 4.
Satellite U400/Satellite Pro U400/PORTEGE M800 Maintenance Manual
Downloaded from LpManual.com Manuals
Diagnostic Test Program Execution Check
Connector Check and Replacement Check
Chapter2Troubleshooting Procedures
2-49