Replacement Procedures
4.4
HDD
Removing HDD
The following describes the procedure of removing a HDD.
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause
1. Turn the computer upside down.
2. Remove the following screws securing the HDD assembly.
3. Disconnect the HDD assembly from the connector on the system board.
Satellite U400/Satellite Pro U400/PORTEGE M800 Maintenance Manual
Downloaded from LpManual.com Manuals
data loss or damage to the device.
• M2.0×3.0B
FLAT BIND screw
x2
4-12