Toshiba Satellite U400 Maintenance Manual page 202

Replacement Procedures
Install the display assembly
The following describes the procedure of installing the display assembly.
1. Insert the pole of hinge to the hole of hinge assembly, set the display assembly on
the base assembly.
2. Screw the hinges
3. Connect the LCD harness to the connector on the system board.
4. Arrange the wireless antenna cables along the guide (front) and secure them with
guide.
5. Arrange the wireless LAN antenna along the guide and contact with the connector.
6. Install cover ASSY of the system.
Satellite U400/Satellite Pro U400/PORTEGE M800 Maintenance Manual
Downloaded from LpManual.com Manuals
M2.5×5.0B FLAT BIND screw x2
35