Replacement Procedures
Installing optical disk drive
The following describes the procedure of installing an optical disk drive.
1. Attach the ODD bracket to an optical disk drive and secure it with the following
screws.
2. Insert an optical disk drive assembly into the slot and connect it to the connector on
the system board.
3. Secure the ODD drive with the following screw.
Satellite U400/Satellite Pro U400/PORTEGE M800 Maintenance Manual
Downloaded from LpManual.com Manuals
Figure 4-13 Disassemble the side bracket
• M2.0×2.5 Flat BIND screw
M2.0X5.0 Flat BIND screw
Screw 2.0*2.5
ODD bracket
x2
x1
4-26