Advertisement
SKIPPING/SEARCHING TRACKS
Œ
This function enables you to find the beginning of any desired track during
playback. If the CD FORWARD SKIP/SEARCH button is pressed once or
repeatedly, the NEXT TRACK or one of the following tracks will be selected.
The Display will show the track or song number.
If the CD BACKWARD SKIP/SEARCH button is pressed twice or more in
rapid succession, play will go BACK one track per press.
Ž
When the set is in PAUSE mode, it is also possible to select the beginning of
a certain track by using the CD FORWARD SKIP/SEARCH button and CD
BACK
WARD
SKIP/SEARCH
button to reach the desired track. After
selection, press the CD PLAY/PAUSE button.
Press and hold the CD FORWARD SKIP/SEARCH button to search forward
at a high speed for a particular point. Press and hold the CD BACK
SKIP/SEARCH button to search backward. Release the button to resume
normal play when the point is found.
REPEAT PLAY - SINGLE TRACK
To repeat the SAME track over and over again, do the following:
Œ
Press the PLAY/PAUSE button to begin play.
Press the SKIP/SEARCH button to select the track you like.
Ž
Press the REPEAT button. The REPEAT indicator will be flashing. The track
you selected will play over and over until you press the REPEAT button twice
.
to
end the repeat function
REPEAT PLAY ALL TRACKS
-
To repeat play ALL TRACKS on a disc over and over gain, do the following.
Œ
Press the PLAY/PAUSE button to begin play.
Press the REPEAT button twice, and the REPEAT indicator will be steadily
on.
All the tracks on the CD will play in order and then start all over again.
Ž
To end the repeat function, press the REPEAT button once.
To stop play, press the STOP button.
RANDOM PLAY
During CD playing mode, press the RANDOM button. Playback begins with tracks
being selected randomly.
WARD
6
PROGRAMMED (MEMORY) PLAY
Up to 20 tracks can be programmed for disc play in the order you like or the
same track (song) can be repeated up to 20 times.
NOTE:
Programming can only be done during stop mode.
PROGRAMMED (MEMORY) PLAYBACK
Œ
Press the PROGRAM button during stop mode.
The display will show "01" and the PLAY/PROGRAM indicator will flash.
Ž
Press the SEARCH/SKIP buttons until the desired track shows on the display.
Press the PROGRAM button. The first track will be stored and the display will
show
" 02 "
and the PLAY/PROG
RAM
Repeat steps 3 and 4 until all the desired tracks are programmed.
‘
When you have finished programming, press the PLAY/PAUSE button to begin
programmed playback or press the PROGRAM button to review the
programmed order.
’
The display will show the track number being played, and the PLAY/PROGRAM
indicator
will keep flashing on and off during programmed play.
“
During play, if you want to hear the next programmed track, press the
SKIP/SEARCH button.
”
When all the programmed tracks have been played, playback ends and the
PLAY/PROGRAM indicator extinguishes.
•
To turn off the power, remember to slide the FUNCTION switch to the off position.
You may open the CD door, move the FUNCTION switch from CD to either OFF or
RADIO or disconnect the power from the unit to clear the programmed memory.
indicator keeps flashing.
7
Advertisement
