Advertisement
6. Align slot in VCP mounting bracket (item 2 pg 2)
with existing hole in floor of vehicle. See Figure 4.
FIGURE 5
8. Remove and discard (2) two screws from the
right side of VCP. See Figure 6.
9. Apply 10" Velcro tape (item 3 pg 2) to top rear
of VCP. See Figure 6.
10. Apply 5" Velcro tape (item 4 pg 2) to left side
of VCP. See Figure 6.
7. Install rear seat track in original manner.
See Figure 5.
4
FIGURE 4
FIGURE 6
Advertisement
