Download Print this page

Audiovox 50-0286x-019 Series Installation Instructions Manual

Chevrolet venture vcp housing

Advertisement

Quick Links

These instructions are intended for use only by experienced professionals in the automotive
customizing business. Special tools and equipment, as well as specialized handling and care
of product during installation, may be required. Before beginning this installation, carefully read
through the following instructions. Use extreme care when cutting headliner material.
Check for wiring or other componentry above headliner material. Cut only where indicated.
Materials/ Tools required for this installation:
1. #2 Phillips screwdriver
3. 3/16" hex socket
5. Awl or similar tool
INSTALLATION INSTRUCTION # 44-0035A
INSTALLATION INSTRUCTIONS
50-0286x-019 SERIES 1181278
CHEVROLET VENTURE VCP HOUSING
FOR
2. Powered screwdriver or drill with adapter
4. 7mm hex socket
6. Audiovox VCP (AVP-7180 or equiv.)
Mar. 11,1999
Printed in the U.S.A

Advertisement

loading

Summary of Contents for Audiovox 50-0286x-019 Series

  • Page 1 3. 3/16" hex socket 5. Awl or similar tool INSTALLATION INSTRUCTION # 44-0035A INSTALLATION INSTRUCTIONS 50-0286x-019 SERIES 1181278 2. Powered screwdriver or drill with adapter 4. 7mm hex socket 6. Audiovox VCP (AVP-7180 or equiv.) Mar. 11,1999 Printed in the U.S.A...
  • Page 2 MATERIALS PROVIDED FOR INSTALLATION: ITEM Description SCREW, # 8 X 1 1/2" PWH SCREW, # 8 X 3/4" PWH SCREW, # 8 X 9/16" PWH VCP MOUNTING BRACKET BEZEL DRIVER SIDE PANEL PASSENGER SIDE PANEL INSTALLATION INSTRUCTION # 44-0035A I. PREPARATION OF VEHICLE INTERIOR Mar.
  • Page 3 FIGURE 1 2. Slide console outward from original position and disconnect wiring from CD player. See Figure 2. 3. Remove and retain (2) two heater vents. See Fig. 2. FIGURE 3 II. PREPARATION OF COMPONENTS FOR INSTALLATION 1. Open door on O.E. center console. Using a 7mm socket, remove and discard (2) two screws which secure lower O.E.
  • Page 4: Installation Of Console

    5. Depress tabs which secure CD player in console. Slide outward to remove CD player from console. See Figure 4. FIGURE 5 8. Remove and retain plastic parts from mounting bracket (item 4 pg.2 ) lay them in a safe place. Install CD player onto mounting bracket.
  • Page 5 FIGURE 7 10. Align holes in rear of CD player with holes in mounting bracket. 11. Secure CD player to mounting bracket using the (2) two original screws. See Figure 8. 12. Place mounting bracket in vehicle in approximate position where original console was located.
  • Page 6 17. Remove and discard the front (2) two screws of the VCP cabinet. See Figure 10. 18. Insert VCP into mounting bracket and make all necessary wiring connections. Check function of FIGURE 11 21. Install the (2)two heater vents in original manner. 22.

This manual is also suitable for:

1181278