Oki OKIPAGE 8p Maintenance Manual page 28

(5) Development
The electrostatic latent image on the surface of the OPC drum is changed to a visible toner
image by applying a toner to it. Development is performed in the contact part between the
OPC drum and developing roller.
1 The sponge roller negatively charges a toner and applies it to the developing roller.
2 The toner applied to the developing roller is thin-coated by the developing blade.
3 A toner adheres to the exposure part of the OPC drum in the contact part between the
OPC drum and developing roller. This causes the electrostatic latent image to be
changed to a visible image.
Charge roller
Developing roller
OPC drum
2 - 16
Developing blade
Sponge roller