Vf Indicator2; Mode Check Ind; Led - Panasonic AJ- E Operating Instructions Manual

Camera/vtr
Table of Contents

Advertisement

Chapter 7 Menu description tables

7-4-5 VF INDICATOR2

Item/
Variable
Data storage
range
TAPE
ON
For selecting ON or OFF for the remaining
OFF
tape amount display.
C U F E
BATTERY
ON
For selecting ON or OFF for the battery
OFF
voltage display.
C U F E
AUDIO LVL
ON
For selecting ON or OFF for the audio level
OFF
meter display.
C U F E
TC
TCG
For selecting the time code which is to be
TCR
displayed.
TCG/TCR
TCG:
OFF
TCR:
TCG/TCR: The time code generator value is
OFF:
C U F E
VTR WARNING
ALWAYS
For selecting how VTR warnings are
NORMAL
displayed.
OFF
ALWAYS: It is displayed every time a warning
NORMAL: It is displayed for 3 seconds when a
OFF:
C U F E
SAVE LED
SAVE&
For setting the operation of the SAVE lamp.
TAPE
SAVE&TAPE:
SAVE
SAVE: The lamp lights up when the VTR
C U F E

7-4-6 MODE CHECK IND

Item/
Variable
Data storage
range
STATUS
ON
For setting whether or not to display the status
OFF
when the MODE CHECK switch is used.
C U F E

!LED

ON
For setting whether or not to display the
OFF
cause display screen if the !LED has lighted
when the MODE CHECK switch is used.
C U F E
FUNCTION
ON
For setting whether or not to display the
OFF
function display screen when the MODE
CHECK switch is used.
AUDIO
ON
For setting whether or not to display the audio
OFF
display screen when the MODE CHECK
switch is used.
C U F E
P.ON IND
ON
For setting whether or not to display the
OFF
status display screen after the power has
been turned on.
C U F E
The underlining in the variable range column indicates the setting in the preset mode.
92
Remarks
The time code generator value is
displayed in the E-E mode.
The time code reader value is
displayed in the V-V mode.
displayed in the E-E mode, and the
time code reader value is displayed
in the V-V mode.
The time code is not displayed at
any time.
has occurred.
warning has occurred and also for 3
seconds after recording has started
and after recording has finished.
It is not displayed at any time.
The lamp lights up when the VTR
SAVE/STBY switch has been set to the
SAVE position. It is off during recording.
As the tape is approaching the end, it
starts flashing in tandem with the warning
alarm.
SAVE/STBY switch has been set to
the SAVE position. It is off during
recording.
Remarks
7-4-7 !LED
Item/
Variable
Data storage
range
GAIN(0dB)
ON
For selecting whether or not the display is to
OFF
come on when the gain is other than 0 dB.
C U F E
GAIN (–3dB)
ON
For selecting whether or not the display is to
OFF
come on when the gain is other than –3 dB.
C U F E
DS.GAIN
ON
For selecting whether or not the display is to
OFF
come on when the DS.GAIN (cumulative gain)
has been entered.
C U F E
SHUTTER
ON
For selecting whether or not the display is to
OFF
come on when the shutter is ON.
C U F E
WHITE PRESET
ON
For selecting whether or not the display is to
OFF
come on when the AWB CH is set to PRESET.
C U F E
EXTENDER
ON
For selecting whether or not the display is to
OFF
come on when the lens is in the extender mode.
C U F E
BLACK STR
ON
For selecting whether or not the display is to
OFF
come on when BLACK STRETCH is being used.
C U F E
MATRIX
ON
For selecting whether or not the display is to
OFF
come on when MATRIX is ON.
C U F E
COLOR
ON
For selecting whether or not the display is to
CORRECTION
OFF
come on when COLOR CORRECTION is ON.
C U F E
FILTER
ON
For selecting whether or not the display is to
OFF
come on when a filter other than the 3200K
filter is selected.
C U F E
SUPER V
ON
For selecting whether or not the display is to
OFF
come on when SUPER V is ON.
C U F E
25M/50M
OFF
For selecting whether or not the display is to
25M
come on when the 25M or 50M mode is
SDC905
50M
established.
C U F E
ATW
ON
For selecting whether or not the display is to
OFF
come on when ATW is ON.
C U F E
D.ZOOM
ON
For selecting whether or not the display is to
OFF
come on during digital zoom operations.
C U F E
<Note>
When "ON" has been selected for both the GAIN (0 dB) and
GAIN (–3 dB) settings, the GAIN lamp will light when the gain
is neither 0 dB nor –3 dB.
Remarks

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvcpro aj-sdc615eDvcpro 50 aj-sdc905e

Table of Contents