System Setting; System Mode - Panasonic AJ- E Operating Instructions Manual

Chapter 7 Menu description tables

7-2 SYSTEM SETTING

7-2-1 SYSTEM MODE

Item/ Variable
Data storage range
REC SIGNAL CAM For selecting the video input signals.
VIDEO CAM:
1394
VIDEO: The signals from the GENLOCK IN
1394:
<Note>
CAM is always set when the power is next
C U F E turned on after it being turned off.
REC MODE 16:9/50M For selecting the mode in which to record the
4:3/50M signals on the VTR.
SDC905
16:9/25M 16:9/50M: <16:9> signals are recorded at 50
4:3/25M
4:3/50M: <4:3> signals are recorded at 50
16:9/25M: <16:9> signals are recorded at 25
4:3/25M: <4:3> signals are recorded at 25
C U F E
ASPECT 16:9 For selecting the mode in which to record the
4:3 signals on the VTR.
SDC615
16:9:
C U F E 4:3:
PB MODE MANUAL For selecting the playback mode.
AUTO MANUAL: The playback mode accords with the
SDC905
AUTO: In this mode, the recording mode is
C U F E
REC TALLY RED For selecting the method used to inform the
GREEN user that the unit is recording when a system
CHAR using an extender or other device is
configured and BOTH is selected as the 26-
PIN CONTROL menu item setting while the
system is used in the remote control mode.
RED:
GREEN: The green tally lamp lights.
CHAR:
C U F E
The underlining in the variable range column indicates the setting in the preset mode.
Remarks
The signals from the camera are
recorded.
connector are recorded.
The signals from the DVCPRO
connector are recorded.
Mbps.
Mbps.
Mbps.
Mbps.
<16:9> signals are recorded.
<4:3> signals are recorded.
25M or 50M setting of the REC
MODE item.
Operation proceeds with 16:9 or 4:3
read from the tape.
automatically detected and playback
is performed in the same mode.
The red tally lamp lights.
The letters "REC" appear on the
viewfinder.
7
81