White Balance Mode; User Sw Gain - Panasonic AJ- E Operating Instructions Manual

Chapter 7 Menu description tables

7-5-6 WHITE BALANCE MODE

Item/ Variable
Data storage range
FILTER INH ON For selecting whether or not to keep the AWB
OFF memory (Ach, Bch) data for each filter.
ON: The data is kept in the two Ach and Bch
OFF: The data is kept for each filter.
C U F E
SHOCKLESS AWB OFF For selecting ON (FAST/NORMAL/SLOW1-3)
FAST or OFF for SHOCKLESS AWB which ensures
NORMAL that the setting of the white balance switch to
SLOW1 PRST, A or B is not accompanied by a shock.
SLOW2 In addition, the switching time can be
SLOW3 selected.
C U F E
AWB AREA 25% For selecting the AWB detection area.
50% 25%: An area near the screen center
90%
50%: An area near the screen center
90%: An area equivalent to 90% of the
C U F E
AWB & ABB ON For selecting whether or not to reset the GAIN
OFFSET OFF and PED values on the ROP menu when
AWB or ABB is executed.
ON: The values are not reset.
OFF: The values are reset.
C U F E
COLOR TEMP PRE 3200K For
:
temperature.
5600K
C U F E
AWB A MEM For selecting the allocation of the WHITE BAL
VAR switch position and Ach.
MEM: The switch position and Ach are
VAR: The color temperature of A can be set
C U F E
COLOR TEMP A 3200K For setting the color temperature when AWB
:
A has been set to VAR.
5600K
C U F E
AWB B MEM For selecting the allocation of the WHITE BAL
ATW switch position and Bch.
VAR MEM: The switch position and Bch are
ATW: The position and Bch are allocated as
VAR: The color temperature of B can be set
C U F E
COLOR TEMP B 3200K For setting the color temperature when AWB
:
B has been set to VAR.
5600K
C U F E
ATW SPEED NORMAL For selecting the ATW control speed.
SLOW
FAST
C U F E
The underlining in the variable range column indicates the setting in the preset mode.
Remarks
memories for each filter used.
equivalent to 25% of the screen is
detected.
equivalent to 50% of the screen is
detected.
screen is detected.
selecting the AWB PRE color
allocated as memory values when
AWB is executed.
to vary using the COLOR TEMP A
menu item.
allocated as memory values when
AWB is executed.
ATW start switch functions.
to vary using the COLOR TEMP B
menu item.

7-5-7 USER SW GAIN

Item/ Variable
Data storage range
S.GAIN For selecting whether or not to enable a
2
30 dB setting of 30 dB for SUPER GAIN.
O
2 : The 30 dB setting is enabled.
O : The 30 dB setting is disabled.
C U F E
36 dB For selecting whether or not to enable a
2
setting of 36 dB for SUPER GAIN.
O
2 : The 36 dB setting is enabled.
O : The 36 dB setting is disabled.
C U F E
42 dB For selecting whether or not to enable a
2
setting of 42 dB for SUPER GAIN.
O
2 : The 42 dB setting is enabled.
C U F E O : The 42 dB setting is disabled.
48 dB For selecting whether or not to enable a
2
setting of 48 dB for SUPER GAIN.
O
2 : The 48 dB setting is enabled.
O : The 48 dB setting is disabled.
C U F E
DS.GAIN For selecting whether or not to enable a
2
6 dB: (1/25) setting increase of 6 dB for DS.GAIN.
O
2 : The 6 dB setting increase is enabled.
O : The 6 dB setting increase is disabled.
C U F E
12 dB: (1/12) For selecting whether or not to enable a
2
setting increase of 12 dB for DS.GAIN.
O
2 : The 12 dB setting increase is enabled.
O : The 12 dB setting increase is disabled.
C U F E
20 dB: (1/5) For selecting whether or not to enable a
2
setting increase of 20 dB for DS.GAIN.
O
2 : The 20 dB setting increase is enabled.
O : The 20 dB setting increase is disabled.
C U F E
Remarks
7
95